1, the property office signed:
The procedures needed to prepare the signature in advance bring the relevant documents and documents to treat the property as friendly and friendly.
They are people who will deal with each other in the future
2. Meters, gates, and TV boxes are bought in advance to test each gate. If you don't understand it, ask the property circuit diagram on the gate, keep the TV box open, and ask where there is a signal cable to the property. Box key
3, toilet check the water equipotential terminal box in the hydropower reform, do not touch to see the location and height of the top of the water pipe, determine the shape and height of the ceiling to measure the distance from the center of the toilet to the wall,
Upper use when buying a toilet
4, the kitchen to understand how to use the gas meter to understand how to use the boiler, and water testing to see the water meter
5, socket with a small lamp or other items to try each outlet,
Make sure there are no short circuits and bad outlets
6, the window sliding glass window and screen window, see the fluency to see if the glass is cracked
7. Ceiling, Wall, Floor Measure Floor Height Check the ceiling, wall, and floor for crack cracks. Check whether each air-conditioned room has an air conditioning hole.
8, before signing to ensure that all the switches, sockets, doors and windows inside the house have been tested and written on the acceptance list of the property. Seriously, the problem and location must be clearly described.
9. Sign the key with two keys: house receipt and key exchange, keep the key, and keep the key
TV air conditioner window socket glass room switch glass door kitchen glass sliding door bathroom ceiling bathroom door
Previous Good home decoration design network - "self-service home inspection form"
Next New housing acceptance must pay attention to what
Proposed house closing date: It is recommended that you go to the housing collection process on the third or fourth day. Step 1: The owner receives the “Completion Acceptance Record Formâ€, “House Land Survey Technical Reportâ€, “Residential Quality Certificate†and “ The second step: the owner pays the remaining housing money to collect the key and signs the "Receipt of the House Key". The third step: The owner does the comprehensive acceptance and asks questions, suggestions or solutions for the problems in the acceptance. Step 4 : According to the agreement...
Check-in is the normal procedure for repossession, but at present, there are not many developers who can make buyers check the room first. The usual practice is to allow the owner to sign the repossession document first, and then issue an approval clause to allow the owner to go to the property management office to get the key. When the owners entered the room, they found that there was a problem and the complaint was weak. In order to avoid this situation, the owner should insist on the first-stage inspection and post-registration procedures, and should be aware of the quality of the house and excessive indoor harmful gas found in the inspection.
New home renovation is necessary to begin acceptance of new houses, new house acceptance of what skills, what are the required acceptance tools, the following will be my acceptance of new homes in the process of acceptance techniques and the use of acceptance tools shared to everyone. First of all: the date of collection, it is recommended that everyone go to the house on the third or fourth day. Required acceptance tools and uses: A plastic washbasin - a small hammer used to check the sewage pipeline - for acceptance of the house wall and the ground ...
Clearing doubts on housing collection 1. First of all, it must be made clear that the collection of non-acceptable housing is the owner’s right and the right can be abandoned and delayed. It is the developer’s obligation not to submit the room, and the obligation must be fulfilled on time. 2. The main process of normal housekeeping on site: Presenting the owner's certificate (buying a house contract, etc.) - Checking and receiving the relevant documents to hand over the house - Asking for a key - Testing the house (including community planning) - Signing the "house handover book" - Taking leave . 3, not necessarily in the "receiving notice...
Did you find it hard to get to the day of your family? Acquiring home inspection is a major event. Don't patronize the excitement and have to check it carefully. When do you go to the inspection room? What are the tools for inspection? What is the process of home inspection? This article is for you to share the experience of these practical home inspection room users!
submit
Push Pull Props
Pull-push prop are used for supporting the wall and column formwork
There are two kinds of pull-push props. One is suitable for the formwork not higher than 3000mm;
Another is suitable for the formwork higher than 3000mm as a reinforcer
Characteristics:
Highdegree of standardization
Simple site operations
Quick adjustment
Here comes our 5 types of Scaffolding systems:- Cup lock Scaffolding(C-Lock Scaffolding)
- Ring lock Scaffolding
-Kwistage Scaffolding
-H-frame Scaffolding
-ID15 Scaffolding Tower, this type Scaffolding is the most widely used in construction, such like bridge.
-Whole Aluminum Scaffolding
Push Pull Props,Push Pull Props Adelaide,Push Pull Acrow Props,Adjustable Steel Push-Pull Props
HENGSHUI PIONEER IMP & EXP TRADING CO ., LTD , https://www.hspioneer.com