China International Hardware Exhibition Abrasives Abrasive Zone will double

The '12 China International Hardware Show (CIHS'12) will double the abrasive abrasive area, covering an area of ​​over 2,500 square meters, occupying nearly a quarter of the pavilion. Ms. Shi Lanlan, executive director of China Hardware Products Association (CIHS), recently revealed. According to the introduction, in the more than ten years of the world's second largest hardware exhibition, China International Hardware Exhibition, Abrasives abrasives have always been one of the most important categories of exhibits. Under the strong demand of exhibitors and professional buyers, the 2008 China International Hardware Exhibition refined the subdivision of the exhibits and set up the Abrasives Abrasive Zone for the first time. In 2010, this The area has been expanded on a large scale, and the number of exhibitors in the abrasives industry has reached 187. In 2011, this number exceeded 200. “In response to the strong demands of exhibitors and professional buyers, refer to the abrasive abrasives area in recent years. Growth rate, this year, we decided to adjust the planning of this area, double the area to 2,500 square meters, almost occupying a quarter of the pavilion, while increasing the area of ​​light, the number of exhibitors is expected to reach 350 Family. “These directors said that in the past few years, we have been pursuing the subdivision of exhibits, and the scale and volume of professional exhibition areas such as locks, fasteners, wire mesh nails, doors and windows and furniture hardware have developed rapidly. "When the abrasive abrasive area is hot, China International Hardware Exhibition Organizing Committee will also provide more convenient and more targeted procurement services for domestic and foreign professional buyers in this industry, and will organize the 'cutting and polishing application'. In the form of technical forums and other activities, the buyer is the preferred domestic manufacturer of abrasive abrasives and provides one-on-one trade matching services on site. At the same time, China International Hardware Show will continue to hold the annual 'New Product Showcase and Promotion' event to showcase new products and processes in the abrasives industry to domestic and overseas buyers. New materials and new technologies. It is understood that China International Hardware Exhibition was founded in 2001, is the world's second largest hardware exhibition, by China Hardware Products Association, Germany Cologne International Exhibition Co., Ltd., National Federation of Industry and Commerce Hardware and Electrical Chamber of Commerce, China Council for the Promotion of International Trade Light Industry Branch Co-sponsored by Beijing Shirui Exhibition Co., Ltd. and Shanghai Continental Tools Development Co., Ltd. The scale of the exhibition reached 110,000 square meters and more than 2,400 exhibitors in 2011. The professional audience reached 41,000, including 3,292 overseas visitors and 40% of European and American buyers. More than 70% of the audience come from the enterprise management and decision-making level. The world's leading retailers include Wal-Mart, Home Depot, Kingfisher Group, LGSourcing, Leroy Merlin, Saint-Gobain, Metro, etc. According to the organizer, '12 China International Hardware Show It will be held at the Shanghai New International Expo Center on September 19-21. At present, the overall booth reservation rate has exceeded 70%, and the abrasive abrasive area has already exceeded 60%.

Carbon Steel Fitting

Carbon steel butt welding pipe fittings are the most widely used pipe fittings. It is made of high-quality steel pipe and is formed by heating or pressing. Carbon steel pipe fittings are divided into carbon steel elbow, carbon steel tee, carbon steel cross, carbon steel reducer (large and small head), carbon steel head (cap) 5 series. The main implementation standards include GB, DIN, ASME, JIS, GOST. The biggest use of carbon steel pipe fittings is to connect pipes, Valves, pumps and other equipment to form a complete piping system.
When using, the pipe fittings are evenly welded with the flange or directly with the pipeline, so that the entire pipeline is integrated and starts to work normally.
Carbon steel pipe fittings are widely used in water, beverage, beer, food, petrochemical, nuclear power, machinery, medical equipment, fertilizer, shipbuilding, waterproofing and other pipeline systems. It is the most widely used pipe fittings in the piping system and equipment of machinery, petroleum, chemical industry, water conservancy, electric power, shipbuilding, air conditioning and other departments. The tube cap is also the end cap on the pressure vessel, which is a main pressure-bearing component of the pressure vessel. The quality of the cap is directly related to the long-term safe and reliable operation of the pressure vessel.
Types of Carbon Steel Butt Welded Fittings:
According to the model can be divided into: ANSI B16.9 ANSI B16.28 JIS B2311SGP DIN 2605, DIN2615 DIN2616 DIN2617
According to the shape, it can be divided into: carbon steel pipe fittings are divided into carbon steel elbow, carbon steel tee, carbon steel cross,
Carbon steel reducer (large and small head), carbon steel head (cap)
According to the thickness can be divided into: SCH 10 SCH20 SCH30 STD SCH40 XS SCH80 XXS
According to the process, it can be divided into: stamping, pushing
According to the material can be divided into: Q235 20# CT20 ASTM A234 WPB

Carbon Steel Fitting,Carbon Steel Pipe Nipples,Carbon Steel Flanged Fittings,A105N Fittings

Inner Mongolia Overseas.Trade co.,LTD , https://www.flangevalvejoint.com