(1) During installation, the construction organizer must clearly understand the written description and precautions printed on the protective film, and explain to the operator, pay special attention to which side facing the standard. Do not misplace.
(2) Before installation, the protective film should not be removed. Only remove the protective film about 50mm along the edge of the board. Immediately after installation, remove the protective film. If you must continue to protect the board, remove the film and re-cover it. Protective film.
(3) The viscous material of the sealing material shall be free from damage to the PC solar panel.
(4) The sealing tape should have good weather resistance and should not lose its viscosity and mechanical strength for a long time.
(5) Do not polish or clean the sun board with strong alkali. Do not rub the surface with a hard brush to avoid pulling hair.
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcell.com