How to remove the ceiling? In general, few people will demolish the ceiling, of course, does not rule out the possibility of re-planning and design of new ceilings, especially when second-hand housing renovation or second-hand housing renovation needs to understand this issue. There is also a case where the ceiling needs to be removed is to be fully cleaned, but this will only appear on the integrated ceiling. How do you demolish this ceiling ? What should we pay attention to when we remove the ceiling? Let's take a look with Xiaobian.
How to remove the ceiling
1. Integrated ceiling removal
How to remove the integrated ceiling ? Its disassembly is very simple, as long as the suck, pull, disassemble these three small steps will be able to get, usually buy a matching sucker, this is the demolition, as long as a light on the board, the air Suck away. To suck in one of the corners, pull it out and pull the four corners apart to remove the entire board.
After the outer panel is disassembled, the internal structure can be seen, which is more convenient for cleaning. Each side of the board is equipped with an edged auxiliary keel. The auxiliary keel has the function of connecting the module and the light steel keel. Afterwards, as long as the assembly is pressed slightly along the keel, pay attention to the position of the different pattern ceiling.
2. Aluminium buckle ceiling removal
There are two types of aluminum buckles in the ceiling of the aluminum buckle plate. The square buckle and the strip buckle are used for the square buckle. The suction cup is used for the square demolition. The corner of the square is strongly pressed by the suction cup, and then the corner of the aluminum buckle plate is pulled hard. Tilt up and the other three corners can be removed in the same way.
The removal of the strip-shaped aluminum gusset plate is more troublesome, mainly because it is a piece of pressure when it is installed, and the final piece may have a small slit of 0.5-1 cm. When disassembling, starting from the edge strips, glass glue is used to fix the edge strips and the tiles, and it is necessary to cut between the edge strips and the tiles. Find the last gusset plate, use a flat-head screwdriver or a relatively thin long iron piece, gently draw a few knives along the glass glue, and then insert it into the edge of the edge seal. Gently press hard, and then turn from the edge. Start to disassemble. It is necessary to first break the middle, and the two sides are easily deformed.
3.pvc ceiling removal
How to remove the pvc ceiling ? For the demolition of pvc ceilings, we must first observe the plastic gussets. The last piece on the edge is not the whole piece. It is generally the last piece that is installed. It is also necessary to remove this piece first. You can hold the last piece of plate to the edge of the wall by hand. Push hard, push both sides at the same time, push it to the end, it will be separated from the other side of a plate, and then directly to get it down, the second board will be unloaded screws, screws in the middle of the wooden strip, directly screwed down You can remove the board and repeat it in turn to remove the entire ceiling.
Remove the ceiling should pay attention to what
1. When the original ceiling decoration is dismantled, care should be taken to remove it as much as possible, without retaining the original ceiling decoration structure. In particular, the structure of the weight of suspended ceilings such as hangers and pendants in the original ceiling must be removed, which is conducive to the safety of subsequent construction.
2. The power supply should be cut off when dismantling. If it is not considered for continuous use, then the circuit in the ceiling can be removed as much as possible. The circuit in the original ceiling has almost no use value.
3. The safety of the equipment and facilities in the original ceiling shall be taken into consideration when demolition. Many old houses in the last century have heating pipes in the ceiling, and some houses are central air-conditioning systems, to avoid damage to pipelines and equipment.
4. To avoid damage to ventilation ducts and flue ducts when removing the original ceiling from the kitchen and bathroom.
Editor's Note: The above is about how to open the ceiling and remove the ceiling should pay attention to what the introduction, I hope the Xiaobian share these contents can help everyone, if you still have those who want to know can look on our website, to provide you with Comprehensive home decoration, building materials, life and other information.
Integrated ceiling
The Elongated Bidet Toilet Seat is indeed a bathroom fixture that offers advanced hygiene and comfort functions. Here are some additional details about its features:
PP Plastic Material: The Bidet Seat is made of durable and easy-to-clean PP plastic. This material is known for its strength and resistance to wear and tear, ensuring the longevity of the bidet seat.
Warm Water Cleaning System: The bidet seat features a warm water cleaning system that provides a gentle and soothing cleansing experience. The adjustable temperature control allows users to customize the water temperature according to their preferences.
Adjustable Water Pressure: Users can adjust the water pressure of the bidet spray to achieve their desired level of cleansing. This feature ensures a comfortable and effective cleaning experience for each individual.
Heated Seats: The bidet seat includes a heated seat function, providing warmth and comfort during use, especially in colder environments. The temperature of the seat can be adjusted to suit personal preferences.
Drying Function: Some bidet seats offer a drying function, which eliminates the need for toilet paper after cleansing. This feature provides convenience and a more hygienic alternative to traditional drying methods.
Hygienic and Comfortable Experience: The bidet seat's comprehensive features, such as warm water cleaning, adjustable pressure and temperature, heated seats, and drying function, contribute to a more hygienic and comfortable bathroom experience. It eliminates the need for toilet paper, reducing waste and promoting better hygiene practices.
Sleek and Modern Design: The bidet seat's sleek and modern design adds a touch of sophistication to any bathroom decor. It blends seamlessly with the existing fixtures and enhances the overall aesthetics of the bathroom.
Investing in an Elongated Bidet Toilet Seat is a practical choice for individuals who prioritize hygiene and comfort in their daily lives. It offers advanced features that enhance the bathroom experience and promote better personal hygiene practices.
Elongated Bidet Toilet Seat, Electronic Bidet Cover, Elongated Toilet Seat, Bidet Function Toilet Seats
Guangdong Fabia Intelligent Technology Co., Ltd , https://www.fabiaintelligent.com