Intelligent parking management system entrance vehicle:
In the first step, the vehicle enters the area of ​​the residential parking lot management system, reads the card and captures it. If it is a temporary vehicle, it first takes the card, then reads the card and captures it;
The second step is to determine whether the card is valid, effectively enter the next step, invalid, and contact manual processing;
In the third step, the timing begins and the gate is opened to wait for the vehicle to enter;
The third step, the normal appearance, then enter the next step, if overtime, need to contact the manual processing;
The fourth step is to detect the ground and determine whether the vehicle enters;
In the fifth step, when it is completed, it will be gated and the vehicle will be completed.
Intelligent Parking Management System Export Vehicles:
The first step: The export has two kinds of situations. First, the fixed vehicle arrives at the exit, reads the card and captures, and the second is the temporary vehicle, read the card and compare it;
The second step is to judge whether it is effective, effectively enter the next step, invalid, contact the third step manually, open the gate and wait for the vehicle to exit;
The fourth step, through the detection of the ground, to judge whether the gate falls, and the appearance is completed;
An angle grinder, also known as a side grinder or disc grinder, is a handheld power Tool used for grinding (abrasive cutting) and polishing. Although developed originally as tools for rigid abrasive discs, the availability of an interchangeable power source has encouraged their use with a wide variety of cutters and attachments.
Angle grinders can be powered by an electric motor or compressed air. The motor drives a geared head at a right-angle on which is mounted an abrasive disc or a thinner cut-off disc, either of which can be replaced when worn. Angle grinders typically have an adjustable guard and a side-handle for two-handed operation. Certain angle grinders, depending on their speed range, can be used as sanders, employing a sanding disc with a backing pad or disc. The backing system is typically made of hard plastic, phenolic resin, or medium-hard rubber depending on the amount of flexibility desired.
Electric Angle Grinder,lithium electric tool
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com