Some people will consider where marble tiles are suitable for renovation when purchasing tiles. What are the different performances used in different places? Marble tiles are widely used in “star hotels, high-end villasâ€. , public space, etc. "a landmark that requires respect and glory; can also be used in "living room, aisle, porch, background, stairs, kitchen, bathroom, etc." private homes that need to show the master's style; products can be laid on the wall Indoor and outdoor wall surfaces can be widely used. What's more important is that Xiaobian brings you the construction and cleaning methods of marble tiles. Let's learn together!
Marble tile combination paving feels more refined
Laying points: Tiles of different sizes, styles and colors are laid out in a certain combination.
Suitable type: suitable for European style, modern style, retro style, etc., and the paving method is more abundant. It is usually possible to use a marble or tile that is slightly darker than the tile of the paving tile. Around 15 cm around the floor, the effect of the paving effect makes the material more delicate and more elegant.
Intimate Tip: The matching products of the combined paving are also wave-punching, ground-stitching and so on. Wave lines generally use dark tiles, mainly used in the vicinity of the ground or aisle porch. Ground flower lines, horn flowers, etc. are floor decoration paintings made of ceramic tiles, mainly used in the foyer, coffee table or dining table.
Cross or vertical for minimalist style
Laying points : paving in parallel with the wall. The bricks are aligned and seamed with a grout that is close to the color of the bricks. It looks fresh and clean.
Suitable type: suitable for modern minimalist style.
Intimate Tip: Rectangular tiles are tiled or vertical to make the space look spacious. The tiled way and the ground flower make the simple space more refined.
Marble tile diamond diagonal paving for small area embellishments
Laying points: tiling the wall at a 45-degree angle, which is relatively labor-intensive. However, the geometric lines of the composition are criss-crossed, which makes the overall effect more vivid and unified, and can bring a strong three-dimensional effect to the space.
Suitable type: suitable for European and Chinese styles, but also for modern minimalist style. In the visual sense, the original square bricks will become diamond-shaped, not too rigid, and the diagonal paving effect is more sturdy.
Intimate Tip: Square tiles with smaller specifications are suitable for small-area partial embellishments, because large-scale use will give people a trivial feeling, and it is not convenient to clean.
Marble tile construction skills
1. Construction of professional construction team. Practical experience and skills in stone paving.
2, be sure to leave the seams, the seam width is not less than 1mm. If it is wet on the ground, the base mortar is square, the groove width is S≥20mm, and the groove depth is H≤20mm.
3. Regardless of whether it is applied to the floor or wall wetness, it is necessary to incorporate sawdust into the mortar and plain ash (the sawdust should be thin, the length is 3-5mm), the blending amount and the dry weight ratio are 7%; if there is no sawdust, the rice bran, Meteorite replacement.
4. In the mortar at the bottom of the product, the sand used is medium sand; coarse sand and fine sand are not available.
5. Under normal circumstances, the cement label is not greater than 325#. If there is no 325# cement for special reasons, it can be replaced by 425# cement. The mortar should be prepared according to the following ratio: “cement: sand=1:4～5â€; the contact board surface pulp can not be pure cement slurry, but must Formulated by adding not less than 20% fine sand to the cement.
6. Apply color-coordinated waterproof paint layer to the four sides of the brick before construction to prevent the brick and brick gap from infiltrating into the sewage and reflect the stains, especially the white pattern products.
7. Arrangement principle: In the process of sequential paving, the general situation is recommended to be laid in the direction indicated by the arrow at the bottom of the brick. If there is a special pattern, it can be uniformly laid according to the brick pattern or the directional pattern.
8. When filling the joints, first clean the brick joints, then paste the four sides of the bricks for color separation protection, and then fill the joints with appropriate caulking agent.
9. For the ground part that has already been laid, it must be covered with a protective layer, such as cardboard or thin wood. It is best to use felt to prevent the people from walking during the construction process to bring sand, which will cause the surface of the board to be damaged. For the pollution marks of cement that have already been produced, it should be cleaned with a clean rag and wiped with water. It should not be allowed to harden by cement. After that, it should be scraped off with force, which will easily contaminate or damage the surface.
UVC lamp 253.7nm, different type. quartz material .
Uvc Lamp,Uv Germicidal Bulb,Uv Germicidal Lamp,Uvc Tube
Changxing leboom lighting product CO.Ltd. , https://www.leboomuvs.com