| Home>Bearing knowledge>Analysis of the selection of sliding bearing grease |
Analysis of the selection of sliding bearing grease
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1) Bearing load is large; when the rotation speed is low; smooth grease with small penetration degree should be selected; vice versa, high penetration bearing should be selected. High-speed bearing should use smooth grease with smaller cone penetration and good mechanical stability. The viscosity of the smooth fat base oil is lower.
2) The dropping point of the selected smooth grease is usually higher than the working temperature of 20-30 ° C; in the case of high temperature continuous operation; pay attention not to exceed the smooth grease to allow the temperature scale.
3) When the sliding bearing works in water or wet environment; should choose calcium-based, aluminum-based or lithium-based smooth grease with good water resistance.
4) Select smooth grease with good adhesion.
2. Selection of smooth grease for sliding bearings:
The load is <1MPa; the circumferential speed of the journal is less than 1m/s; the maximum operating temperature is 75°C; the calcium base grease No. 3 is used.
Load 1-6. 5MPa; journal circumferential speed 0. 5-5m / s; maximum operating temperature 55 ° C; use No. 2 calcium base grease,
The load is >6. 5MPa; the circumferential speed of the journal is less than 0.5m/s; the maximum operating temperature is 75°C; the calcium base grease No. 3 is selected.
Load <6. 5MPa; journal circumferential speed 0. 5-5m / s; maximum operating temperature 120 ° C; use No. 2 lithium grease,
The load is >6. 5MPa; the circumferential speed of the journal is below 0.5m/s; the maximum operating temperature is 110°C; the calcium-sodium grease of No. 2 is used.
The load is 1-6. 5MPa; the circumferential speed of the journal is less than 1m/s; the maximum working temperature is 50-100°C; the lithium base grease No. 2 is used.
The load is >5MPa, the circumferential speed of the journal is 0.5m/s; the maximum working temperature is 60°C; the calendering grease No. 2 is used.
In a humid environment; temperature is 75-120 ° C; should consider calcium-sodium grease smooth grease. Under humid environment; operating temperature below 75 ° C; no calcium base grease No. 3; also available aluminum grease Operating temperature is 110-120 ° C; available lithium grease or sulfhydryl grease. When the collection is smooth; the consistency is smaller.
3. Smooth cycle of smooth grease for sliding bearings:
Occasionally work; unimportant parts: shaft speed <200r/min; smooth period 5 days, shaft speed >200r/min; smooth period 3 days.
Successive operation: shaft speed <200r/min; smooth cycle once every 2 days, shaft speed >200r/min; smooth cycle once every day.
Continuous operation; operating temperature is less than 40 ° C: shaft speed <200r / min; smooth cycle once a day, shaft speed > 200r / min; smooth cycle once per shift.
Successive operation; operating temperature 40-100 °C: shaft speed <200r/min; smooth cycle once per shift, shaft speed >200r/min; smooth cycle twice per shift.
Recommend to friends comments close window
| Bearing related knowledge |
| SKF bearing appearance when viewing "point 5 target" The reason why the temperature of NSK bearing is too high is the difference between the grinding tapered roller bearing and the fan bearing of the "imported bearing ring double end" |
This article links to http://
Please indicate the bearing network http://
Previous: SKF Aviation Rolling Bearing Skills (1)
The next part: Rolling bearing residual magnetic skill conditions (2)
Sterile Petri Dishes from YongYue medical carries a complete line of contact plates, sterile, square (with a grid) and absorbent pad Petri dishes, cell spreaders and spatulas. Please contact us if you need additional product specifications. Two of our most popular lab dish products are standard petri dish and 3 compartment petri plate.
Sterile Agar Petri Dish
YongYue® petri dishes are offered in a variety of shapes and sizes for your everyday research needs. YongYue® manufactures optically clear plastic petri dish which are precision-molded from biomedical grade polystyrene for Cell Culture. Dishes are packed in heavy-wall polyethylene sleeves to ensure product integrity. YongYue® petri dishes have many applications including cell culture, growing bacteria and growing yeast.
Clear plastic disposable petri dishes of standard depth (15mm). Supplied in sterile packs. Will deform on autoclaving. Triple Vented. Also suitable for the temporary housing of small invertebrates during collection, or for distributing small chemical samples in class.
Diameter: 90mm
Depth: 15mm
Pack of 20
Culture Dish,Petri Dish,Petri Plate,Petri Dish Bacteria,Cell Culture Dish
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue.com