When the house is renovated, it must be handled with care, especially the installation of some water pipes buried in the ground. If the installation is not in place, the water pipe rupture will cause a series of problems, the wall will seep water, and the maintenance will be difficult later. So, how to deal with the wall seepage ? What are the causes of water seepage? The following small series on these issues to explain.
How to deal with wall seepage
1. If it leaks from the construction hole, like the inside of the exhaust hole or the flue. Then it is necessary to feedback with the property in time. If the warranty period is exceeded, it is necessary to find a company that repairs the waterproof plugging in a timely manner so that they can do waterproof treatment to the exhaust hole and the flue.
2. How to deal with wall seepage? In fact, you can also open the pipe hole to do waterproof treatment. Fill the pipe with cement oil at the bottom of the pipe, then increase the level of the first grade of the file, and finally make a waterproof coating around the dried pipe. After a day of testing for seepage, you can restore the wall without problems.
3. How to deal with wall seepage? In fact, in order to avoid this from happening, the installation work must be done during the renovation work. The pipeline should be fixed and poured according to the specifications. Carefully and carefully to do every step, so as to prevent these problems from happening.
4. When seepage occurs on the wall, in order to find the leak point, you can remove the wall covering and make it waterproof again. After the completion of the test, it is still necessary to do a water seepage test after 24 hours, so that it can be repaired without any problems.
5. If it is a crack in the wall, you can clean it up, clean it up with a bad joint first, and then repair it with a high-grade marking according to the requirements of the construction specification. Cracks can also be repaired with high pressure grouting.
What are the causes of water seepage?
1. If you live in an old house and you continue to rain, there will be water seepage on the walls. The water seepage on the wall of the top floor will be more obvious.
2. During the renovation, there was no good grasp of the temperature in the poured concrete, and the post-conservation was not in place. This will make the structure and ratio of the steel imbalance, roof weight will cause cracks. This will cause water seepage.
3. When the external wall is exposed to the humidity and temperature of the outside world for a long time and is affected by the alternating wet and dry humidity and temperature difference, the cracks on the wall surface will occur if the quality of the previous construction cannot be guaranteed. This will form a water-permeable channel, causing the seepage of the external walls.
4. Another reason is that the waterproof layer has not been brushed into place, causing rainwater to infiltrate the wall and wall seepage occurs.
5. The bathroom is also a condition in which water seepage occurs frequently, because the bathroom is a place where water is often used. A long time will result in some small cracks. In this case, the water upstairs will slowly penetrate the roof below.
6. There is also a leaking water pipe, water pipes hidden in the ground of the house, or solar water pipes leaking for a long time.
The article concludes that there are many reasons for wall seepage, and the way of seepage treatment is not the same. Therefore, when you are decorating your house, you can't catch up. You should pay attention to details. How can the water seepage above the wall be treated and seepage causes? This will avoid the same problem.
Plastic Hand Shower,Handheld Shower Mounts,Hand Shower Plastic,Plastic Shower Heads
Moon Shower Sanitaryware Co.,Ltd , https://www.moonshowerglobal.com