Factors affecting bearing oscillation

Source: Bearing network time: 2017-12-10

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The oscillation caused by the error in the manufacturing process; the more the error is. The roundness, the waviness and the appearance roughness of the outer surface of the steel ball are the most important factors for the oscillation in each bearing part; the second is the inner ring and the outer ring channel. Shape error and appearance roughness; again bearing cleanliness and lubricant quality.
Working conditions such as device conditions; speed; axially accepted load direction; magnitude, etc.

Recommend to friends comments close window

Bearing related knowledge

Rolling bearing features
After the work of NSK bearing equipment, the work of the bearing is analyzed. The cause of the damage of the bearing is detailed. The precision grade of the rolling bearing is the inch tapered roller bearing LM12749/10

This article links to http://
Please indicate China Bearing Network http://

Previous: SKF single row deep groove ball bearings commonly used suffix:
Next: Analysis of the causes of corrosion of the painful bearing and how to avoid it

End Emitting Fibers

End emitting fibers (also called end glow, or end light) are the classic fiber optics, with bright points of light at the ends and very little light escaping along the strands themselves. They are usually thin, somewhere from 0.25 to 3mm in diameter. They are also generally stiffer than the side emitting fibers.

end glow fiber optic,End lit PMMA fiber,fiber optic light pipe

Jiangxi Daishing POF Co.,Ltd , https://www.jxopticfibrelight.com