Pneumatic angle grinder has the advantages of safety and stability, large cutting force, and low vibration. It has a significant effect on the design of grinding, cutting, grinding, etc. in industrial manufacturing, and also has the effect of allowing the operator to use for a long time without fatigue. Next, Xiao Bian came to talk about the specifications, operating points, and uses of pneumatic angle grinders.
　　 Pneumatic Angle Grinder Specifications (Aerodynamic Angle BX-2500G as an example)
Model specification: BX-2500G
Wheel size: 100*6*16mm (4 inches)
No-load rotation: 11000rpm
Air consumption: 6cfm/min
Full length: 242mm
Weight: 1.6kg
　　 Pneumatic angle grinder operation and maintenance
1, the correct generation of gas supply system: inlet pressure at the tool entrance (non-air compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2), too high, too low are detrimental to the performance and tool life . The intake air must contain sufficient lubricant so that the air motor in the tool is sufficiently lubricated (place a white paper on the tool exhaust to see if there is oil, normally it is oily). The intake air must be as water-free as possible, and it is not appropriate if the compressed air is not air-dried.
2. It is not allowed to remove the parts of the tool and operate it afterwards. In addition to affecting the safety of the operator, the tool will be damaged.
3, if the tool is slightly faulty or can not reach the original function through use, can not continue to use, to check immediately.
4. Regularly (about once per week) inspection and maintenance tools, add grease (Grease) to bearings and other rotating parts, add oil to the air motor parts.
5, use all kinds of tools, be sure to follow all kinds of safety regulations and instructions for operation.
6, to use the appropriate tools to work, the tool is too large and easy to cause work injuries, the tool is too small easily lead to damage to the tool.
　　 Pneumatic angle grinder use
1. Applicable to all kinds of industrial factories, shipyards, steel plants, train factories, and machinery factories. Various types of metal plate burr removal, polishing and grinding, surface rust removal, weld slag removal operations.
2. Suitable for chamfer grinding and cutting of metal molds and parts.
3. The grinding, polishing, deburring, decontamination, derusting, and other operations of spare parts factories such as automobiles, motorcycles, electric vehicles, and bicycles.
4, suitable for stone industry grinding, cutting, burr removal of various castings.
5, maintenance of various industries, occasions.
6, suitable for grinding and cutting operations in various other industries.
Pneumatic angle grinders can do metal processing and construction industries as well as emergency rescue work. Mainly used in tightening assembly, automotive manufacturing, electronics, home appliances, auto parts production, equipment maintenance, aerospace and other fields. After reading the above specifications of the pneumatic angle grinder specifications, operation and maintenance of points and uses, I believe we should have a better understanding of the pneumatic angle grinder.
Oven Pulse Valve,Pulse Ignition Valve,Oven Pulse Ignition Valve,Safety Valve With Pulse Ignition
GUOLONG PRECISION VALVE CO.,LTD , https://www.glstovevalve.com