Toilets, this piece of furniture, can be said that every household now has extremely high needs. However, it is not easy to install it. Although it is usually purchased after purchase, it will be installed by professional construction personnel. Then, what is the installation method for the toilet? What are the precautions for toilet installation? Let's learn about it together with Xiaobian.
1, how to install toilets
First of all, before the toilet is installed, the level of the sewage pipe and the ground should be checked to see if there is any blockage in the pipe, such as sediment, waste paper, etc., and it is also necessary to check whether the position of the toilet is horizontal and horizontal. If the ground is uneven, it should be leveled before installation.
Second, confirm the center of the sewage pipe. The confirmation method is to turn the toilet upside down, and then determine the center on the sewage outlet of the toilet, and at the same time, draw a cross centerline at the center, and the center line of the cross extends to the bottom of the toilet and the feet around.
In addition, it is a fixed toilet. The installation method of the toilet is to align the reticle on the toilet with the floor sewage outlet, and then ensure that the toilet is installed horizontally, and then firmly press the sealing ring, and then you can install the screws and decorative cap of the floor. Now.
Then, after fixing the toilet, seal the bottom. The method is to install a special sealing ring on the sewage outlet of the toilet, or apply a circle of glass glue or cement mortar around the perimeter, and the ratio of cement and sand should be adjusted according to 1:3.
Next, you should install the tank fittings. Before installation, flush the pipe with 3-5 minutes of water. After the water pipe is cleaned, the angle valve and the connecting hose are installed, and then the hose can be connected to the installed water tank fitting and the water source can be pressed.
Finally, it is necessary to check the toilet to check whether the inlet valve and the seal are normal, whether the position of the drainage valve is flexible, whether there is a phenomenon of jamming and leakage, and whether the inlet valve is installed and filtered. Devices and so on.
2, toilet installation precautions
a, circle must be used to seal the toilet apron, if the factory is already sealed, it would be better.
b. Install the toilet must use the toilet seal, must not only use glass glue around the drain to try to make the water does not leak out.
Xiao Bian concludes: The installation method for the toilet and the precautions for toilet installation are introduced here. In the process of installing in the home, the installation of the toilet seems simple, but the specific installation steps and details should be carefully grasped to avoid unnecessary trouble and economic loss for the future home life.
The LED Walllight is widely used at Beedroom, Hotel and outside of Shopping mall and so on.
The advantages for DiLin LED Walllight
1. Fashion design with high quality of aluminum housing and constuction to make sure the cooling of LED Walllight good enough.
2. IP65 and IP20 High quality of COB & SMD CHIP and driver solution to make sure LED Walllight quality stable enough.
3. Strong Engineer & QC team are good at customizing and offer flexible solution for competitive Walllight.
4. Fast lead time: 5-7days for samples and 15-25days for bulk order.
5. 3 or 5 year warranty with standardized after-sale serivce process.
Led Wall Light,Wall Light For Bedroom,Wall Lights Indoor,Waterproof Wall Light
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinled.com