Tile beautiful seam method
1. Tool preparation: double-barrel glue gun, seam cone, scraper, spatula, wallpaper knife (scissors);
2. Choose the color of porcelain seam glue: the general situation is determined according to the color matching of the tiles and your own preferences;
3. Operation steps: pull out the buckle on the cover of the outlet of the porcelain seam glue bottle, then unscrew the cover of the outlet, and then use the wallpaper knife to cut the outlet of the mixing tube into a 45-degree angle, the tile joint is less than 2mm, just use the wallpaper knife to cut the slope of the front end of the discharge nozzle; the tile seam is larger than 2mm, you can cut a little more; the width of the discharge nozzle mouth should be smaller than the width of the slit to ensure that no overflow; then Screw the mixed hose to the mouth of the porcelain seam glue bottle and tighten it; finally, install it on the double-tube glue gun, and you can start construction.
4. Construction method:
(1) After entering the site, clean the site, and then use the cleaning cone to clean up the filler in the ceramic tile and on both sides. The ground and brick joints are not allowed to have floating dust;
(2) First hit 30 ~ 40cm (cannot be used for removal) to make the porcelain seam glue in the hose fully mixed;
(3) After confirming that there is no dust in the gaps of the ceramic tiles, use a glue gun to evenly hit the porcelain joint glue in the brick joints;
(4) Then use a scraper to scrape the porcelain joint glue flat;
(5) After the porcelain joint glue has dried, shovel a small amount of material from both sides of the brick joint with a spatula;
Matters needing attention in ceramic tile
1. Ensure that the bottom surface of the construction tile joints must be flat, strong, free of dust and moisture;
2. The width of the discharge nozzle is slightly smaller than the width of the slit, so that the discharge can completely cover the bottom surface of the gap of the ceramic tile;
3. The material should be evenly distributed, and small bricks with many cross interfaces should be carefully scraped;
4. The construction temperature is 15 ~ 30 degrees, and the spilled material must be cleaned up during construction;
5. Within 3 hours of ground construction, do not walk on it to avoid contamination of the surface of the US sewing agent with dirt.
Stainless Steel Precision Turned Parts
Precision turning parts
Precise accessory is a kind of high-precision hardware turning part processed by lathe and other machine tools, which is characterized by high precision, precision and small size
It is a very common product in our hardware processing parts industry and is widely used. The basic precision can reach 0.01mm-0.1mm. The products include steel, aluminum alloy, brass, environment-friendly iron, stainless steel and other precision CNC machining lathe parts of different sizes and shapes
Advantages of precision turning parts:
High technical requirements, beautiful appearance and good product quality
Scope of application:
Mechanical equipment, computers, mobile phones, electrical appliances, fans, cameras, high-end electronics, toys, instruments, automobiles, new energy, optical fiber communications, photographic stage equipment and other products.
Stainless Steel Precision Turned Parts,Cnc Turned Components,Turned Components,Cnc Precision Turning Parts
Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com