Self-priming pump automatic connection and note the following items:
1. The motor housing must be well grounded to prevent leakage and ensure safety.
2. Before use, the tail cover of the motor should be toggled to ensure that the rotation of the motor is flexible; for long-term use, the fan blade must be set to prevent corrosion.
3. If any water is suddenly stopped during use, check it immediately.
4. For the first use, the water injection screw plug should be unscrewed first, and then the pump should be filled with water and then started.
5, Do not arbitrarily adjust the pump pressure switch, otherwise it may lead to the pump can not work properly.
6, in order to improve the efficiency of the use of the pump, it is recommended that the pump installation height (vertical distance from the water pump) is not higher than 6 meters, otherwise reducing the efficiency of the pump, but also will greatly affect the life of the pump.
7, the inlet pipe joints must ensure that the seal to prevent leakage of water absorption 8, the bottom valve should be more than 40mm above the bottom in order to prevent inhalation of sand.
9. This series of pumps can only be used for pumping clean fresh water, and can not be used for long time for pumping muddy sand or other polluted water.
Author: Yong Jia Liangbang pump manufacturers
1. The motor housing must be well grounded to prevent leakage and ensure safety.
2. Before use, the tail cover of the motor should be toggled to ensure that the rotation of the motor is flexible; for long-term use, the fan blade must be set to prevent corrosion.
3. If any water is suddenly stopped during use, check it immediately.
4. For the first use, the water injection screw plug should be unscrewed first, and then the pump should be filled with water and then started.
5, Do not arbitrarily adjust the pump pressure switch, otherwise it may lead to the pump can not work properly.
6, in order to improve the efficiency of the use of the pump, it is recommended that the pump installation height (vertical distance from the water pump) is not higher than 6 meters, otherwise reducing the efficiency of the pump, but also will greatly affect the life of the pump.
7, the inlet pipe joints must ensure that the seal to prevent leakage of water absorption 8, the bottom valve should be more than 40mm above the bottom in order to prevent inhalation of sand.
9. This series of pumps can only be used for pumping clean fresh water, and can not be used for long time for pumping muddy sand or other polluted water.
Author: Yong Jia Liangbang pump manufacturers
Gym Duffel Bags,Multi-Color Gym Bags,Small Gym Bag For Women,Waterproof Durable Sports Gym Bag
Dongguan C.Y. RedApple Industrial Limited , https://www.redapplebags.com