How to store bearings?

Source: Bearing network time: 2018-03-30

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Bearing storage method:
1. Only the relative humidity of the storage room does not exceed 60%; the temperature does not change much; the bearing can be stored in the original packaging for several years.
2, sealed bearings or bearings with dust cover; after a long time of storage; the smoothness of the smooth grease filled in the bearing may be reduced. The storage room should also be sensational and rocking.
3. Bearings not stored in the original packaging should be kept in good condition; avoid corrosion and pollution.
4, large rolling bearings can only be placed flat when placed; the side of the inner and outer ring is the best supported.
5. If it is an upright storage; because the inner and outer rings and the rolling parts are heavier; the inner and outer ring walls are relatively relatively.

Recommend to friends comments close window

Bearing related knowledge

Introduction to large-sized motor bearing housings for automotive wheel bearings
KOYO imported bearing progressive shaft support rigid skill bearing selection summary bearing professor teaches you how to pick and use bearings

This article links to http://
Please indicate China Bearing Network http://

Previous:The correct application of the protection requirements of the sand making machine Next issue: How to deal with the noise of the Japanese NTN bearing during use

Nylon Roller Brackets

Nylon Roller Brackets ,Keel Roller Bracket,Bow Roller Bracket,Anchor Roller Bracket

Jiaxing Gates Hardware Products Co.,Ltd , https://www.jxgateshardware.com