ã€China Aluminum Network】 All people who do extrusion of aluminum profiles know that it is not worthwhile to scrap the profiles in the case of bending. It should not happen, and it can be avoided! So, how to reduce or avoid scrapping it!
Extrusion and straightening: straightening is a very serious link caused by the profile, the straightening work must pay attention to the intensity of straightening. If the strength is too great, the profile may be deformed, closed, orange peel, etc., and the strength is too small. The resulting profile is not straightened, causing bending.
Squeeze frame: This section is also very important, after sawing out the fixed length, aluminum will be framed, this fashion frame worker should pay attention to: This material is an oversized or small material, is with pipe or plane Mold pulled out of the material? In general, the material and the tube are not easily bent at both ends of the frame. However, when the material is pulled out from the small material and the planar mold, the two ends can easily be bent. At this time, it should be from the two ends to the middle. Move closer to frame the material. However, even if some profiles do not work, such as louvers, windows, lids, etc., they must be placed on time-efficient profiles and lifted into frames.
Surface treatment: The billet is aged, the hardness is up to standard, and the profile is not so easily bent. However, when it is put on the shelf, it is necessary to pay attention to it. When both ends are raised, try to avoid vigorous fluctuations. The vigorous fluctuations will also cause aging aluminum profiles. A certain amount of bending.
The workshop is a place to stand and work for long periods of time, so the use of anti-fatigue MATS is very important for the health and productivity of employees. The following is a discussion about the necessity of using anti-fatigue MATS in the workshop and the types of options available on the market: anti-fatigue floor MATS combine various functions: fatigue relief, high elasticity, shock resistance, etc., can effectively prevent impact and fatal injuries, and are very durable for industrial and harsh environments. The shape of its bottom and surface is designed for workers to stand for a long time, which can greatly reduce the fatigue and pain caused by prolonged standing on the legs.
Anti Fatigue Mats Industrial,anti fatigue mats,fatigue mats,anti fatigue floor mats,anti fatigue kitchen runner
Jiangyin Yining E-Commerce Co., Ltd , https://www.pvcmatyining.com