First generation processing
Plates: The first-generation cabinets are mainly plated with large core boards and density boards, and are fired on one side with a white fireproof board (with a multi-purpose adhesive or white latex). With the advent of the era of environmental protection, Daxin board gradually exits the large stage of the cabinet, replacing it with more environmentally friendly moisture-proof plates and particleboards (note: unqualified moisture-proof plates add more adhesive than the large-core plates) due to the humid weather in the south In less than one year (in coastal areas), the MDF will expand and mold, so it automatically exits the range of cabinet panels.
Edge-sealing: Hand-paint the adhesive on the cross-section of the board body and the edge band, (the thickness of the edge band is generally between 0.3-0.45mm) After drying for a period of time, fold the edge-strip and the board body together and press it manually. , Then use a blade and other tools to trim the edges. Generally, only the front face is visible, and the back and bottom sides are not sealed. This type of edge sealing is still used in a large number of cabinet factories. There are no shortage of "brand cabinets".
Assembling: The first-generation cabinet assembly process can be referred to as the “straight-through-screw†era. Because the cabinet industry has just begun, a large number of businesses are eager to dismount. Therefore, professional equipment (row drilling) that requires capital and technology is rejected. So far, this kind of technology still occupies the mainstream position in the cabinet processing industry. The so-called "straight through the screws" as its name implies is the use of hand-held electric drill galvanized screws directly through the board body panel splicing assembly, simple, practical, low cost, no need to row drilling technology. The gall must be assembled in the factory. At the same time, in order to save the board, common cabinets are often made into a conjoined cabinet (two or more cabinets share one or more side panels). The back plate is nailed directly behind with a gun nail or nail. The simplest way to identify this process is to look at it (without professional knowledge). When the delivery is completed, you can see the cabinet. If the manufacturer will move one cupboard over, explain With the first-generation cabinet assembly process, if there is only one bag with a positioning hole, then it is a second-generation or third-generation cabinet assembly process.
Hanging yards: The first-generation craft hanging yards generally use triangular hanging yards, open the wall cabinet can see the corner white iron sheet, generally brush the paint.
Backplane: The backplane generally uses a 3mm single-sided Polaroid or MDF and is nailed directly behind with a gun or nail.
Second-generation processing technology
Plate: The use of 16mm chipboard, at that time the big brands - including imported brand cabinets, all use this type of plate as a plate body. However, the chipboard's waterproof capacity is poor, and many cabinets did not do the relevant waterproof protection at the time, causing the sink cabinet to collapse in advance. Replaced by the third generation of plates - moisture-proof plate.
Edge sealing: Edge sealing by hot melt machine, hand trimming.
Assembling: The second-generation cabinet assembly process is called “drilling†era. The assembly of modern cabinets is connected by quick-loading parts. The hole drills are processed at the factory, after quality inspection, packaging, and then used at the installation site. One (eccentric) assembly. Assembled into a unit cabinet, so when high-grade cabinets are delivered, you can't see the cabinet and only see one package.
Hanging yards: The main use of round hole "L" hanging yards, good-looking, but the force is not good.
Backplane: 3mm single-sided Polaroid or MDF, slotted installation.
Third-generation processing technology
Plates: Use 18 environmental moisture-proof plates;
Edge banding: automatic rubberizing, edge sealing, edge trimming, head breaking, polishing once in place, and edge banding;
Assemble: In addition to the second generation cabinet assembly process, add a mallet reinforcement;
Hanging code: Use hanging or concealed hanging code;
Backplane: Double sided hydrogen amine density board, slotted installation;
Waterproof: sink cabinet aluminum foil waterproof (a silver aluminum plate);
Countertop processing: Countertop processing must be lapped, milled, polished, and bonded. The bonding process is critical. If there is a slight carelessness, it will expose unsightly glue lines. Once again, it is polished, which determines the finish of the countertop - bright If you don't shine, you're done. Then polishing, the wax that determines the role is the polishing wax. A good wax can make the table brighter and cleaner - it is necessary to use a special mechanical polishing machine. Hand-painted car highlight wax should be a kind of perfunctory behavior.
There must be a water-blocking process on the surface of the table and the underside of the table should be covered with slats.
Cabinets to buy space paint cabinets
For rapid detection of influenza A and B, respiratory adenovirus, Helicobacter pylori, dengue fever, fecal occult blood, dengue fever, monkeypox, luteinizing hormone, respiratory syncytial virus, human chorionic gonadotropin, malaria, Helicobacter pylori, professional Quick inspection products, easy to carry, can be used in any place. Play the role of disease prevention and rapid diagnosis.
rapid testing kit,rapid test kit,at home rapid test kit,rapid kit test,home rapid test kit
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedicals.com