Five steps of syringe pump operation

1 Turn on the power and turn on the power switch. 2 Select the syringes (20mL or 5OraL) of a particular brand and remove the syringes and fix them in the Syringes holding tank of the syringe pump. 3 After pressing the Band key, select the number from 1 to 5 according to the label used and press Enter to enter. Press Size again, use the number keys to select the syringe specifications, press Enter to enter. 4 Press nd_ / h and press the numeric keys to enter the desired drug delivery rate, press EI1 a ter input. 5 Press Start to begin dosing.

Chisel

Chisels are classified in different shapes according to different uses:

Flat chisel: the cutting edge is flat, the cutting edge and the chisel body is an inverted isosceles triangle, mainly used for opening square holes or repairing some square holes;
Oblique chisel: the blade is 45° Angle, the blade and chisel body is an inverted right triangle, mainly used for repair, most of the dead corners for carving and carving repair;
Gouge: the cutting edge is semicircular, mainly used for opening circular or elliptical holes;
U type chisel: the cutting edge is U-shaped, which is rare now, mainly used for carving and repair;

Chisel,chisel for hammer drill,chisel for stone,impact chisel,stone chisel

Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com