According to this person, the wind power industry standards set by the National Energy Administration mainly focus on wind power technical design and equipment standards and tend to become industry standards. The wind power standard formulated by the CEC focuses on the details of wind power grid integration. After the initial draft is formed, it will be reported to the National Standardization Committee, which is expected to form a national standard. Although the two standards focus on different areas, in general, the relevant provisions of national standards are lower than industry standards. The National Energy Administration will maintain communication with CEC in the near future to ensure the coherence of the two standards.
The above two standards all refer to the requirements of wind farms to ensure the stability of wind power grid-connected power in varying degrees. This means that wind farms are not only responsible for project declaration and construction, but also need to take certain responsibility for wind power grid connection and output. Experts believe that to achieve the above requirements, on the one hand, wind farms can choose to cut out wind power during the peak hours of output, and on the other hand, they can use their own energy-storage battery equipment with smooth wind power.
According to relevant experts from the Energy Bureau, it is a general trend to require wind farms equipped with energy storage battery equipment to pass standard setting. However, it seems that the cost of deploying energy storage facilities is relatively high. If this cost is borne by the wind farm, the wind power Profit may bring a certain burden.
The working principle of a Medium Flow Peristaltic Pumpis like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling
1. Clean and pollution-free: the fluid only passes through and touches the Peristaltic Pump hose.
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. With stop valve function, no siphon, no seals, stop valve and check valve function.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Medium Flow Peristaltic Pump,Constant Flow Peristaltic Pump,Intelligent Accuracy Pump,24V Peristaltic Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.chuangruipump.com