Waterproofing of a bathroom is one of the most prone to problems in home decoration because its particularity, once it leaks, causes a lot of unforeseen consequences, which is a very vexing thing and can easily cause problems between neighbors. Contradictions are also troublesome to repair. Therefore, when we are doing home renovations, we must pay enough attention to the waterproofing of toilets. Since the size of the bathroom is generally small and there are many pipelines, it is necessary to pay attention to the following matters during construction.
Zhong Tao Sanitary Ware
One needs to do a leveling layer. First, use a cement mortar to flatten the floor (especially the house that you want to redecorate) and then do the waterproofing. This will prevent leakage of the waterproof coating due to uneven thickness.
Second, we must focus on the key areas. The seams between the wall and the ground and the joint between the upper and lower water pipes and the ground are the most prone to problems. Therefore, we must pay special attention to these parts. The treatment must be meticulous, and we must not be sloppy.
Third, we must waterproof the wall. In order to achieve a better waterproof effect, the general bathroom wall has to do about 30cm high, the shower area is about 1.8cm high waterproof treatment.
Four to do waterproof test. After the waterproof construction is completed, all sewers of the toilet shall be blocked and a “low wall†shall be built at the entrance of the bathroom for water injection test. The height of water injection shall be about 20cm. After 48 hours inspection, if there is no leakage around the bathroom wall and the ground, the waterproof quality of the bathroom is very good. Instead, find the leak and perform repairs.
Qi Jia’s Sixth Anniversary Returns 60 Million
Bathroom entrance decoration restaurant decoration home decoration cement house decoration paint house bathroom waterproof bathroom door
Lishui Aiteli Machine Equipment Co.,Ltd , https://www.aitelimachine.com