Solid wood furniture, high prices have now an indisputable fact, consumers are more and more attention to the maintenance of furniture, furniture maintenance helps to increase the useful life of furniture, furnishings and maintenance of some consumers incorrectly or even damage the furniture. In addition, the use of furniture should also be reasonable, especially solid wood furniture , which has certain requirements for air humidity and space temperature.
Pay more attention to solid wood furniture
The use and maintenance of solid wood furniture should pay attention to the following points:
1. Avoid humid environment. In summer, if there is flooding indoors, it is better to use thin rubber pads to separate the furniture from the contact with the ground, and to maintain a gap of 0.5-1㎠between the wall of the furniture and the wall.
Â
2. Pay attention to the cleaning and maintenance of the furniture surface. The surface of solid wood furniture is coated with paint, which is particularly important for the maintenance and maintenance of its paint film. Once the paint film is damaged, it will not only affect the appearance of the surface, but also further affect the internal structure of the product. Therefore, you should always keep the furniture clean. Try to gently remove the dust on the surface with a soft dry cotton cloth every day. Every once in a while, wipe the dust off the corners of the furniture with wet cotton thread wringed out of moisture Clean and dry soft cotton cloth can be wiped dry, or you can apply a thin layer of high-quality light wax after wiping, and wipe the gloss gently like leather. This not only maintains the wooden furniture, but also increases To its light. However, the use of light wax must be careful, and must not use inferior products containing chemically corrosive ingredients.
3. Do not use petrol, alcohol and other chemical solvents to clean. If there are stains on the surface of the furniture, don't wipe it hard. You can gently remove the stains with warm tea water. After the water has evaporated, apply a little light wax to the original part, and then lightly grind several times to form a protective film.
4. Keep away from heat sources. In winter, it is best to place the furniture at a distance of about 1M from the heating stream to avoid long-term high baking, which causes local dry cracking, warpage and local deterioration of the paint film.
Â
5. Avoid scratching hard objects. When cleaning, do not let the cleaning tools touch the furniture, usually pay attention, do not let hard metal products or other sharp objects hit the furniture, and protect the surface from scratches.
6. Avoid direct sunlight. Try to avoid the long-term exposure of outdoor sunlight to the whole or part of the furniture as far as possible. It should be placed in a place where it can avoid the sunlight, or use transparent tulle curtains to separate direct sunlight. In this way, it does not affect the indoor lighting, but also makes the soft light add a warm and romantic atmosphere to the living room, while protecting the indoor furniture .
　　 Maintenance of pulleys:
The pulley is the soul of the entire inner door . Although it is small in size, it plays an important role. One or two drops of lubricating oil every six months or so can keep it smooth. The pulley of the sliding door is divided into upper and lower wheels. If the upper and lower wheels are sliding with needle bearings, there is no need to add lubricating oil, just pay attention to clean debris. For general bearings or rubber wheels, lubricating oil should be added to its sliding parts every six months.
Maintenance of sliding door panel:
For daily cleaning of door panels, use soft, dry cotton cloth or silk to wipe. Wiping with a hard or hard medium (such as sticky dust) may scratch the surface; but do not rinse with clean water; remove minor scratches on the surface, use a soft cloth dipped in a small amount of toothpaste to repeatedly wipe; Wood or baking varnished boards, regular waxing is an effective method to keep the surface bright and bright, while glass does not require waxing.
Track cleaning:
A clean track will greatly extend the service life of the pulley. It is necessary to clean the debris in the track, especially hard objects.
Use and maintenance of the wardrobe <br> Safety matters in the use of the wardrobe
1. Place objects steadily, heavy objects should be placed at the bottom of the wardrobe to prevent the center of gravity of the wardrobe from falling over. It is not advisable to place heavy objects on the top of the wardrobe, so as to prevent the top plate from sagging and affecting the door switch; Protruding deformation.
Â
2. Some wardrobes are customized according to the user's indoor space. If you need to relocate, please contact the company to ensure the overall quality effect after disassembly.
3. Educate children not to play near the acute corner of the wardrobe, mirror, glass, metal parts to avoid accidental injury.
Wardrobe Maintenance <br> Never use hard objects to wipe the cabinet surface, glass, and avoid contact with acid and alkaline chemicals and greasy objects. Keep dry and ventilated. (Litian)
Galvanized Steel Fence
Steel fence is also known as steel picket fence, ornamental steel fence. The panels are manufactured using the highest-strength steel pickets and rails, and are available in a wide range of sizes and styles. Material: Galvanized steel Q195 or Q235 Finish: galvanized and powder coated Main market: America, Canada, Australia, Europe, etc
Galvanized Steel Fence,Prefabricated Steel Fence,Galvanized Steel Fence Post,Galvanized Steel Pipe Fence
HeBei Bosen Metal Products Co.,Ltd , https://www.hbbosenfence.com