Safety management is not fundamental than completely solving the problem.

The cause of the accident: In March of this year, due to the death of a 31-person traffic accident on the Jin-Ji Expressway, the relevant Shanxi provincial authorities ordered a ban on all dangerous goods transport vehicles for a period of one year from March 5. The province is driving at high speed.

Controversial question: Is it not appropriate that such a “vehicle-forbidden order” for high-speed roads for dangerous chemicals vehicles is appropriate?

Practice has proved that the transportation of hazardous chemicals vehicles due to bans into township roads without road traffic police control increases the probability of occurrence of accidents. Such regulations are inconsistent with actual work and should be stopped as soon as possible.

Analysis of the reasons: First of all, after the vehicles of dangerous chemicals vehicles were banned, vehicles had to flow into the national roads, provincial roads, and county and village roads. As we all know, whether it is national roads, provincial roads or county roads, the road conditions and the highway can not be compared, the road is bumpy, transport vehicles are mostly tank cars, and hazardous chemicals are mostly liquid or gas, the bumps in the course of the easy to cause the valve Loose and leaking, car tires can also generate punctures due to excessive friction;

Second, there are many non-high-speed intersections. The line of sight is not good, and there are no correct signs. This can easily lead to collision of vehicles and cause accidents.

The third reason is that the vehicles used to transport dangerous chemicals are mostly heavy-duty vehicles, which are relatively difficult to operate and have relatively high requirements for turning radius and load-bearing capacity of roads, especially if they are driving on county and township roads. If there are more roads in mountainous areas such as Shanxi, the possibility of accidents caused by sideways collapse will increase;

Fourthly, the expressway is relatively close to other roads, and most of the trips are close. If you do not go near the road, you will not only increase energy consumption, but also have a greater chance of accidents. On April 24, a large hazardous chemical product from Ningbo, Zhejiang Province Tankers want to enter Shanxi, starting from Ningbo, Zhejiang Province, passing through Anhui, Henan, if you can on the high-speed, from the entrance of Shanxi Pinglu about 60 kilometers to reach the destination. However, due to the implementation of the highway prohibition order in Shanxi Province, the vehicle had to bypass Henan Lingbao and Yuling, passed Shaoguan in Shaanxi Province, crossed the Yellow River into Fenglingdu in Shanxi Province, and then went to Monan Town in Rucheng County. It is equivalent to a big "Zhi" around Henan, Shaanxi and Shanxi. Bumps along the way, bypassing more than a thousand kilometers, greatly increasing the probability of accidents.

Fifth, in recent years, most of the dangerous goods transport vehicles that have been involved in accidents are due to inadequate training of drivers and escorts, fatigued driving, and chaotic management of transport companies, not because of the natural defects of highways or the transport of dangerous chemicals. The vehicle is not suitable for high speed roads.

Xiao Bian concludes: In summary, it is suggested that relevant parties in Shanxi should immediately stop the ban on high-speed transportation of dangerous chemicals transportation vehicles. In the face of accident lessons, we should sum up lessons and solve problems. The high-speed ban on high-speed transport vehicles for dangerous chemicals is only a matter of moving accidents to national roads, provincial highways and county roads. There is no fundamental solution to the problem. The safety management is not as good as sweeping the ground. It will be completed when the accident is removed, and the difficulties and inconvenience will be left to the grassroots and left to the masses. This management approach is not desirable. What we need to do is to think more about ways to manage and more conveniences. the masses.

This site solemnly declares: This article is the original article of China Labor Insurance Network. If you need to reprint please indicate the source.

Medium Flow Peristaltic Pump

The working principle of a Medium Flow Peristaltic Pumpis like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling

1. Clean and pollution-free: the fluid only passes through and touches the Peristaltic Pump hose.

2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.

3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.

4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.

5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.

6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.

7. With stop valve function, no siphon, no seals, stop valve and check valve function.

8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.

9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.

Medium Flow Peristaltic Pump,Constant Flow Peristaltic Pump,Intelligent Accuracy Pump,24V Peristaltic Pump

Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crperistalticpump.com