1 The power outlet should be placed out of reach of the child.
2 educate your child not to insert anything (such as small sticks, wire, keys, etc.) into the socket hole.
3 When unplugging the electric plug, be sure to let the adults do it yourself. Do not let the child do it, so that when the child pulls out half, the child touches the metal part of the plug and gets an electric shock. At the same time, pull the plug to pull the plug out, and should not pull or slap the plug's power cord.
4 The electric outlet of the water dispenser should not be placed directly on the ground to prevent the water from leaking to the ground and soaking the power outlet, especially when the power is on.
5 Do not plug or unplug the power plug with wet hands, and do not wipe the power plug and socket with a damp cloth.
6 Throw the plug of the appliance during a thunderstorm to prevent lightning from damaging the appliance or injuring people.
7 Protect the potential with a transparent soft plastic socket to prevent children from touching the socket hole.
Pathogenesis of electrical burns: A sufficient concentration of ion flux can stimulate the excited nerves, muscle tissue, and cause muscle tissue contraction. Skin tissue can produce heat when it is energized, causing burns and charring. When the current passes through important tissues and organs such as the heart, brain medulla, and spinal cord, it will have serious consequences and even cause death.
Symptoms of electric burns: The main part of the electric shock is electric burn, and the damage is most serious at the current inlet. Local skin appears yellowish brown dry burns, charring, and damage can reach the musculoskeletal. Such as electric shock with high-temperature arc flash or electric spark, the skin around it can have extensive thermal burns. Secondary infections, such as local vascular injury, can cause bleeding. Depending on the severity of electrical damage, there may be varying degrees of systemic response. Light people only feel dizziness, palpitations, pale, weak limbs, general malaise and other symptoms; severe cases may have convulsions, shock symptoms and even death. According to the medical history, the clinical manifestations can make a diagnosis.
What should I do if I am injured?
1, the patient rests in bed, including the entrance is not large, the skin burn area is smaller, you need to carefully observe the changes in the condition. Exposure therapy is generally applied to the wound to keep the injured limb clean and dry, and disinfect the skin 2 to 3 times a day.
2, 3 to 5 days after the injury, the first surgery is feasible. The confirmed necrotic tissue or eschar was first removed and the deep tissue was explored. If there is no obvious infection, the inactivated tissue is removed more thoroughly (no blood, no electrical stimulation, no contraction, etc.), and then wrapped with gauze. Surgery was performed again every 2 to 3 days to remove the necrotic tissue until the wound or skin graft could be sutured.
3, the infected wound should be fully drained, wet, cut off necrotic tissue and eschar every day until the wound grows granulation and heal or skin graft repair. A wide range of deep infections can easily lead to toxemia, sepsis, acute renal failure, etc. In addition to the application of large doses of antibiotics, multiple incision and drainage must be performed in time, and even amputation must be performed. The exposed wounds are at risk of bleeding, and the use of compression to stop bleeding and drug hemostasis can only be a temporary effect. A tourniquet and a surgical bag should be prepared at the bedside.
Concerned about surprises
Label: How to prevent leakage of the socket? Socket electrical injury treatment method
Previous: Anti-corrosion treatment of screws: anti-corrosion method Next: Small hardware purchase university ask
Name : T-MOULDING Vinyl flooring (spc flooring,click spc flooring)
Board Thickness : 4.0-7.0mm
Wearing Layer Thickness :0.3mm,0.5mm as regular
Surface Texture :Deep Grain,Wood Grain,Marble Grain,Stone,Carpet
Finish :UV-Coating
Installation :Click system(Unilin,Valinge)
Delivery Time :15-25 days
Size:6''*48''(150mm*1220mm)
7''*48''(182mm*1220mm)
9''*48''(230mm*1220mm)
9''*60''(230mm*1525mm)
Backing Foam :IXPE(1.0mm,1.5mm,2.0mm) EVA(1.0mm,1.5mm)
Density :2.07kg/m3
Surface :Wood Embossed,Deep Wood Embossed,Handscraped,Eir.
Usage :Bedroom,Kitchen,Basements,Home,School,Hospital,Mall,Commercial to use.
Features :Waterproof,Wear resistant,Anti-slip,Moisture Proof,Fireproof,durable, anti-scratch, anti-bacterail.
Market :Export to American,Canadian,European Market,Part Asia,Africa Countries.Australia Market
Warranty :10 years for commercial and 25 years for residential
Stone Plastic Composite vinyl flooring is more and more popular new style eco-friendly vinyl flooring. SPC rigid flooring is set apart from other types of vinyl flooring by its uniquely resilient core layer. This core is made from a combination of natural limestone powder, polyvinyl chloride and some stabilizers.
SPC vinyl is a luxury vinyl flooring option with a structurally rigid, 100% waterproof core. SPC is also known as rigid core vinyl, and we use these terms interchangeably. Rigid core engineered vinyl flooring is designed to look like wood or stone, but requires less upkeep.
This flooring is durable, waterproof, and perfect for DIY installation. It`s ideal for both home and commercial areas.
T-MOULDING,PVC T-MOULDING,SPC T-MOULDING,WPC T-MOULDING
JIANGSU PERFECT NEW MATERIAL TECHNOLOGY CO., LTD. , https://www.bffloor.com