The investment value of mahogany furniture with inaccurate materials and poor workmanship will be greatly reduced. Now, there is a new way of making fakes in the mahogany market - rubber grinding, which makes people feel that it is difficult to distinguish between authenticity and authenticity. The redwood industry is too deep: the new means of smashing into mahogany furniture is now more and more consumers are buying mahogany furniture as an investment. Although there are not many consumers who really want to buy mahogany furniture for the price, many people are concerned that the mahogany furniture has the potential for appreciation, and “buy it will not lose†and buy it. However, the fake and inferior mahogany furniture not only greatly reduces the investment price, but also shortens the service life of the furniture and causes losses to consumers. In recent years, the price of mahogany furniture has been rising almost every year. In order to pursue greater profits, some merchants have started to work on the materials and structure of mahogany furniture, resulting in a large number of inferior furniture entering the market, and many consumers are discouraged from mahogany furniture. Mr. Wang is a veteran redwood fan. He told reporters that although he has been playing "Redwood" for more than ten years, he does not dare to guarantee that he will not "hit". If a friend asks himself to help choose furniture, he is also very cautious. Because the “water is too deep†in the mahogany industry, it is easy to be “fudged†if you are not careful. The use of mahogany furniture counterfeit means: fake wood, the addition of common mahogany furniture is expensive, largely due to its precious materials. The raw materials of redwood, such as red sandalwood, huanghuali, and red rosewood, have risen in price in recent years. Some mahogany merchants have used the edge of the raw materials to reduce the production cost. The most common is to use the material similar in color and pattern to pretend to be real mahogany. Fu Junmin, general manager of Xuanming's classical furniture, told reporters that some merchants will not use fake materials completely to reduce risks, but will incorporate fake materials into the real materials, making people "true and difficult to distinguish." In the case of red sandalwood, the real rosewood on the market is very rare. The “Kotan†from Côte d'Ivoire is close to the red sandalwood in color and pattern, so it is blended into the rosewood by some merchants to make the final expensive rosewood furniture. . Red rosewood has become the "new darling" of the mahogany market in recent years, and its spike phenomenon is also very serious. Southeast Asia's "flower branches", Panama and Mexico's "dimple Dalbergia" are close to red rosewood in material density, texture and oiliness, and are incorporated into real red rosewood raw materials. Phase: "Grinding" furniture is difficult to distinguish and material can be identified is different, the merchants in the mahogany production process of the falsification almost impossible for consumers to identify. Experts say that the fraud in the process is more deceptive. For example, the colored furniture that was previously exposed by the media is to color the mahogany furniture to cover up the flaws of the furniture itself, and to make the furniture look attractive. Consumers want to see the real material unless the paint film is worn away. Now, in the production of mahogany, there is a more insidious way of fraud - rubber grinding. Experts told reporters that rubber mill furniture is not waxed or painted, and it is almost the same as "white enamel" furniture. Nowadays, in order to verify the authenticity of materials, many consumers often ask the merchant not to carry out any treatment on the surface of the furniture. Waxing or lacquering, but with the technique of rubber grinding, the "white enamel" furniture is not insured. The method of using the rubber grinding is to cover up the problem of using white skin, patching and drying. The whole process of rubber grinding is very simple. It is glued when grinding, and then polished hard. It is repeated two or three times to let the glue penetrate into the furniture. In order to cover the white skin or the compound, it will be colored before the rubber grinding. . The rubberized furniture can be almost fake in the appearance, and some mahogany furniture even has the "pasting" luster. In fact, the rubber grinding is extremely damaging to the furniture. Since the glue contains a large amount of formaldehyde and benzene, these harmful substances penetrate into the wood and cannot be volatilized within a few years, which is extremely harmful to the human body. After the glue blocks the pores of the furniture, the moisture in the furniture cannot be volatilized. Even if the material is not dried, the furniture will not crack in the years before use. However, the stability of the furniture will be greatly affected and the time will not be affected. repair. At the same time, mahogany furniture with blocked pores cannot produce a pulp. Structure: æ¦«å¯ structure cut corner æ¦«å¯ structure allows mahogany furniture to be firmly combined without a nail and a riveting, but now some merchants cut corners on the raft structure in order to reduce labor and material use costs, even with glue and nails. Connections, once the furniture problems, can not be repaired, so that the high-priced purchase of mahogany furniture becomes a pile of waste. An industry insider who asked not to be named told reporters that cutting corners on structural production can at least reduce raw material and time costs by half. For example, instead of the shackles, the rivets and shoulders are not "shoulders". The supporting frame of four or five millimeters thick is only two millimeters. These methods of cutting corners will directly affect the service life of the furniture, and this kind of furniture does not have the investment value that people want. The most worrying thing is that because of the “deep burying†inside the furniture, the structural problems can't be seen by the consumers, and the merchants will not be dismantled for the consumers to check, even if they know all kinds of related knowledge of the structure, It is also difficult to recognize whether the business is fraudulent in this regard.
Based on many years of rich experience in slurry pump manufacturing and design, NAIPU can undertake OEM customization for the whole set of pump and various spare parts. The slurry pump spare parts can be made of various material according to customer`s requirement, Such as : Alloy 20, Hastelloy Alloy , A 61 and so on.
OEM High Chrome Slurry Pump,OEM Pump Parts,OEM High Chrome Impeller,OEM Centrifugal Pump
Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com