As a building decoration material, the vitrified tile has the characteristics of smooth surface, easy cleaning and maintenance, abrasion resistance, corrosion resistance, high strength, good decorative effect, wide use, large amount of usage, and the texture of natural stone. Next small series for everyone to introduce the advantages and disadvantages of vitrified tiles and glass tiles to buy skills.
The advantages of glass tiles
1, colorful and soft, no significant color difference. Natural granites have large differences in color due to the time of diagenesis and the depth of the rock formation.
2, high-temperature sintering, complete porcelain produced a variety of crystals such as mullite, stable physical and chemical properties, corrosion resistance, strong stain resistance, long lasting. Granite due to the natural formation, the time of material, weathering, etc. are not the same, resulting in different density, strength, use two years after the gradual loss of luster, rough surface wear, difficult to clean, affect the appearance.
3, the thickness is relatively thin, high flexural strength, lightweight bricks, building weight reduction. Natural granite has low strength and heavy weight, which increases the load of the building and brings a series of difficulties to the process of transportation and paving.
4, no harmful elements. Granite is a natural mineral that has been buried deep in the earth's crust for a long period of time. It has not been sintered at high temperatures and therefore contains trace amounts of radioactive elements. If it is exposed for a long time, it will be harmful to health.
5, bending strength greater than 45Mpa. The granite flexural strength is about 17-20Mpa
Disadvantages of vitrified tiles
1, because the vitrified tile surface is softer and has the appearance of natural stone, so for some friends who like unique decoration style, this appearance does not cause goodwill, it can not make people refreshing, compared to other tiles, The appearance style of the vitrified tiles is still slightly single, the texture is relatively small, and there are less visible three-dimensional glass tiles on the market.
2. Because the surface of the vitrified tile is smooth, the pores will be exposed after grinding. Oil, dust, particles, etc. will easily adhere to these holes. Therefore, it is relatively easy to be dirty, and it will take more time if you take care of it. Of course, if you It is a hardworking and family-oriented person. This little difficulty can not bring you trouble. If you do not have enough time to clean the room, it is recommended that you place a small floor mat in front of the tiled area and clean up the dust under your feet before entering the house. In the renovation of the house, it is best to clean up the dust in a timely manner, to avoid some viscose dripping on the tiles, if there is viscose on the tiles, be sure to use a special scavenger to remove in time, over time, it is It's hard to clean up again.
Glass Tiles Buying Tips
1, a few drops of tea juice or water on the back of the tile, after a few minutes, depending on the degree of inhalation of water droplets, non-absorbent or low water absorption is good quality.
2, tap the tile to listen to the sound is crisp, the sound more brittle, the degree of porcelain, the higher the density, good hardness.
3. Scratch the tile with a sharp object. If the scratch indicates that the surface hardness is not enough, the surface of the glaze will be polished and the brick surface will not be clean.
4. The color and clearness of the tiles are clear and natural, indicating a high degree of porcelainity.
5. If there are any pinholes on the surface within one meter, the surface of the glaze is not fully fused, and it is easy to produce dirt.
6, to the naked eye to see if the side of the tile is straight, if the warping situation will seriously affect the future of the ceramic tile.
7. Place the four bricks flat on the ground, arbitrarily change their combined edges, and see if the middle cross and gap are even.
Maintenance of vitrified tiles
1, in the decoration process and daily use to maintain the health of the wall and the ground, to regularly clean the surface of dust and other pollutants
2. When laying on the ground, it is better to prepare a small floor mat for the stepping in front of the area so as to remove the sand particles attached to the sole of the guest.
3, do not use hard material on the top scribed: try to avoid hard objects dragging on its surface
4. It is strictly forbidden to adhere the marble glue to the brick surface during the paving process. If the adhesion is to be removed in time with the corresponding cleaning agent, it may be difficult to remove the dirt after a long time.
Editor's summary: The advantages and disadvantages of vitrified tiles and buying techniques of vitrified tiles are introduced here, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
The advantages and disadvantages of vitrified tiles
Flanged Stainless Steel Ball Valve
Flanged Stainless Steel Ball Valve,Ss Ball Valve,Stainless Ball Valve,316 Stainless Steel Ball Valve
Zhejiang Chenxiang import and export trade Co., Ltd , https://www.chenxiang-valve.com