When it comes to engineered flooring, I believe there are not many people who understand it. Solid wood composite flooring, which is staggered and pressed by plates of different tree species, overcomes the disadvantages of wet expansion and shrinkage, has good stability, and retains the natural wood grain and comfortable feet of solid wood flooring. Solid wood composite flooring combines the stability of laminate flooring with the beauty of solid wood flooring, and it also has environmental advantages. So, what is the quality of engineered wood flooring? What is the thickness of engineered wood flooring? If the engineered wood flooring is too thin, it will be easily deformed and if it is too thick, the price will be too high. The thickness of this parquet can be customized. Follow me on the introduction of parquet related knowledge!
Is parquet good or bad?
First of all, solid wood flooring is easy to manage, stable in quality, hard to damage, affordable, and easy to install. It is important to have a good sense of beauty. However, there are also disadvantages, that is, slightly less wear resistance, and there is a very important problem is that it is difficult to repair after soaking.
The performance of solid wood flooring is also receiving much attention. First, with the role of environmental regulation, two, very good natural dry, there is good material, has been processed, can be recycled, good stability, simple construction, and environmental protection without pollution.
Solid wood floor thickness
In the market, there are three kinds of thickness: 12cm, 15cm and 18cm. According to individual requirements, it can be negotiated with the merchant. The difference in the three thicknesses lies in the price. In general, the use of 15 mm thick, due to too thin and easy deformation, too thick price is too expensive. In addition, the thickness of parquet can be customized, thicker can do 25cm, parquet specifications are: 1802cm × 303cm × 15cm (12mm), 1802cm × 150cm × 1cm, 1200cm × 150cm ×15cm, 800cm×20cm×15cm and so on.
When choosing floors, pay attention to floor specifications. This is an important channel for judging quality. Regular manufacturers will not cut corners on specifications. Solid wood flooring is a very cost-effective floor. Consumers tend to focus on prices and styles while ignoring specifications. The wooden floor is not the thinner and lighter the hand feels better. The suitable thickness of the wooden floor is 40mm-65mm, so it is not easy to be deformed. Of course, you can also customize the wood flooring to the dealer.
Parquet composition
1, paint: constitute commonly used are: UV paint, PU paint and so on. Adhesion of paint film is an important measure of quality. Adhesion of paint film is inspected according to the requirements of GB/T 4893.4, and a small amount of intermittent peeling is allowed at the cuts and cuts.
2, surface layer: surface layer often veneer or puzzle, mostly birch, beech, cherry, etc. are expensive species;
The common thickness is: 0.3mm, 0.6mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 4.0mm.
Three-layer engineered wood flooring (three layers: fine hardwood layer with a surface of 3-5cm)
Multi-layer solid wood composite flooring (precise solid wood surface 0.3-0.5cm, other over 7 layers of crisscrossed hybrid wood);
3, substrate: the substrate is a special plywood, made of Liuza, birch and so on. The special plywood is not lower than the technical requirements of GB/T 9846.1-9846.12 and GB/T 13009 second-class products. At the same time, the substrate is strictly selected and processed, and defects that will affect the quality cannot be left.
4, the bottom layer: the bottom material is: miscellaneous, birch and so on. The common specification is 2.0mm.
Through the above introduction, in these two types, it is obvious that the three-tier, apparently fine-grained trees are much thicker than the multi-layers, and this kind of floor belongs to the quasi-high-end floor.
However, if there are more than seven floors, whether it is the 9th floor or the 11th floor, the relative cost is low, so it is the middle and low end.
Editor's summary: The above is the thickness of solid wood flooring is not thicker, the better this is based on the actual needs to determine the relevant knowledge, hope to help meet the needs of friends! For more information, please continue to pay attention to us Website, follow-up will present more exciting content!
Solid wood floor thickness
The Electric Steam Wallpaper strippers is the most productive, safest and easiest to use steam wallpaper stripper.
The Wallpaper Stripper force steam through the layers of paper, helping to not only remove the paper but also glue residue from walls.The Wallpaper Steam Stripper is particularly effective on stubborn papers with paint on, or wood chip paper.
The 3L, 4.5L ,7L Electric Wallpaper Remover Stripper is much easier, compared to soak and scrap off the wallpaper manually, it only uses water which is heated.
Once the water boil then the water evaporates, produces steam out of the plate. The steam will penetrates into the wallpaper and loosen the old adhesive paste, so the wallpaper can then be pulled off and removed easily.
Electric Wallpaper Stripper,Electric Steamer Wallpaper Removal,Electric Steam Wallpaper Remover,Wallpaper Stripper Electric
Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com