The overlying type of wall surface is embedded in the wall with anticorrosive wood bricks, the wooden dragon skeleton is fixed on the wooden bricks, and then the panel is nailed or glued to the wood dragon skeleton. The cross section of the wooden keel is 20-40 mm × 40-50 mm, and the spacing of wood keel is 400-600 mm.
The construction process is: processing the wall surface → bullet line → making wooden skeleton → fixing wooden skeleton → installing wood veneer → installing closing line.
During construction, the following points need to be done:
First, the wall requires a smooth surface. If the wall leveling error is within 10 millimeters, plastering can be used; if the error is greater than 10 millimeters, a wooden block can be added between the wall and the keel.
Second, according to the height of the siding and the size of the room nails sticks made of wood sticks, the whole piece or piece installation, in the bottom of the wooden skirt skirts to install the skirting board, the skirting board fixed to the wood and the wall plate, the height of the skirting board 150 mm, the first use of wood Lines are fixed on the wall plate.
Third, according to the panel thickness to determine the size of wooden keel, transverse keel is generally about 400 mm, vertical keel is generally 600 mm. When the panel thickness is more than 1 mm, the horizontal keel spacing can be appropriately enlarged.
4. When the nail is nailed, the top of the wainscot is to be leveled and the size of the wood bead is the same.
5. After the wooden skirt has been installed, it shall be immediately treated with a veneer and brushed with clear oil to prevent other types of work from contaminating the board.
At the same time, we must pay attention to the following issues in the construction:
First, the wall is damp, should be dry after construction, or do moisture treatment. First, you can do a damp-proof layer on the wall; second, you can leave ventilation holes on the lining board and under the wall; and third, you can pick out the wood bricks inside the wall to make the panel, wood keel and wall away from a certain distance, and avoid moisture. Effect of the panel.
Second, two corners of the wall at the yin and yang must be nailed wooden keel.
Third, such as brushing varnish, should choose the same tree species, color and pattern of the panel.
Wall construction room paint
Roloc Disc Holder
High Flexible durability, This Roloc disc back holder is made of reinforced rubber material, longer life time than other products.Widely used with various types of discs, Mini flap discs, quick change discs, Surface Conditioning Discs, strip discs and Roloc bristle discs etc.The 1/4 shank fits drills, air powered die grinders, and other Power Tools and air tools.Max speed of 30000RPM, full range size of 1in 1.5inch 2in 3inch are available.
We distributes and wholesales various brands of Bonded Abrasives, Abrasive Sanding Disc, Cutting Wheels , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Features:1" 2" and 3" roloc disc pad holder heavy duty very durable rubber pad with 1/4" shaft.Heavy duty rubber pad, aluminum core with nickel plated removable steel shank. Accepts sanding, polishing, surface conditioning/preparation, bristle and other disc consumables, The tool can also be used as a polishing disc holder to polish jewelry or cars.
Roloc Disc Holder,2inch roloc disc holder,Roloc Bristle Disc Holder,Sanding Disc Pad Holder,Die Grinder Roloc Adapter
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com