Production Description:
Item NO. |
FL-3 |
Material |
Cold rolled steel / band steel / hot dipped steel / stainless steel. |
Size |
500*550*2mm |
Surface Treatment |
Polyester powder coating, this treatment make the surface of product smooth and prevent  the  material from rusting |
Color |
white coating powder or based on customer's require |
N.W |
3.0kg |
G.W |
3.5kg |
Suitable |
roof air conditioner bracket suitable for all makes of split air condtioner |
Loading weight |
200Kg |
MOQ |
100Â sets |
Packing |
1set with small carton and 6 sets with big carton |
Big carton CBM |
0.021cbm |
20"Â GPÂ quantity |
6500sets |
Payment term |
T/TÂ (30%-70%) |
Port |
Qingdao port |
Delivery time |
Within 15 days after get deposit |
Â
Feature:
Easy indoor installation
Exclusive precision bubble level assures proper mounting angle
Takes the pressure and weight off the window sill, Minimizes the chance of damage to the window, window parts or outside wallÂ
Made of heavy-duty gague,Solid epoxy-coated thick steel plate, matte surface prevent the A/C to drop out of the window
Works with any brand name Air Conditioner
All necessary hardware included and all weather construction
Â
Specification:
- Fits wall thickness from 4" to 11"
- 13.5" long A/C resting surface
- The support holds up to 180 pounds
Â
Parameters:
Â
The P10 two-color display module all uses the JX5020 driver chip from Taiwan Macroaccumulation. The LEDs of each branch are correspondingly driven by an IC pin. One IC pin drives one LED. We use static cross-current The driving method ensures that the current of each IC can be guaranteed, and the normal guarantee will not cause the entire module to heat up due to the different scanning methods, which will cause damage to the IC, and the brightness of the LED will also be similar to the static cross current. The static cross-current drive ensures the stability of the entire screen.
When all the LED display modules are tested, paste QC, pass, and then perform the first semi-finished product test aging. The longer the aging time, the better, let him exceed 24 hours as much as possible, and then we will display the display module Put on the bottom shell, ready to start pouring.
The glue is filled with a fully automatic glue filling machine. After the ab component glue is combined, the filling is carried out according to the ratio of 10:1. It is better not to lower or increase the ratio. The ratio of 10:1 is just right. , It can be surface-dried in about two hours, and it will dry out in about 4-6 hours. Such glue will have a good guarantee for long-term use.
After the module is filled with glue, place the module on a horizontal plane, and test with a level meter, and then try to make each module as flat as possible, complete the 4 corners of the horizontal position on the same level, the choice of AB glue It is also very important. The AB glue choice must use more than 40 yuan per kilogram of glue. Its adhesion and durability will be very good. It cannot be filled with shoddy glue. It will crack after a long time. The screen will leak. Then put all the display modules in their masks and arrange them to start packaging.
Led Display Outdoor,Taxi Top Led Display,Full Color Led Display,Traffic Led Display
Shenzhen Wide Way Optoelectronics Co., Ltd. , https://www.wdmtrafficlight.com