In the morning, when you leave the bathroom with a lazy footstep and blur the light refracted by the radiant shell of the faucet, you unscrew the slippery handle of the faucet, the water wakes up and wakes you up, the faucet closes a new day in your life. . Here's how to install the basin faucet!
Single hole basin faucet installation
When purchasing a single-handle basin faucet, you should pay attention to the diameter of the water outlet. Most of the market is now a rigid pipe, so you should pay attention to the height of the water inlet. The 35 working points from the basin are most suitable. When installing, be sure to choose a special angle valve, and the angle valve must be fixed with the hot and cold water pipe of the wall outlet. When you find a distance between the angle valve and the water pipe on the faucet, purchase a special extension tube to connect. Remember, don't use other water pipes to connect, because if the water pressure is too large, it will fall off easily and leak water, causing damage to you. If the inlet pipe is too long to exceed the outlet pipe, you can cut off the part according to your needs. If the angle is not suitable, bend it to the position you need as needed. Remember: Do not bend hard to 90 degrees or more than 90 degrees. When installing the basin to remove water, please don't forget to buy the small interface of the faucet (the faucet is shorted). Don't forget to flush the water pipes buried in the wall before you install it.
Thermostatic faucet installation
Before installing the thermostatic faucet, please check if the water pipe is left hot and cold right. Remember not to connect the hot and cold water pipes incorrectly, so as to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostats because the water pressure is too low. Do not forget to install the hot and cold water filter when installing the thermostat.
Single hole kitchen faucet installation
The requirements are stable, because the kitchen faucet is used frequently, and it is moved and moved, so it is easy to loosen, so the lock nut must be tightened. At present, some faucets appear on the market for the screw to increase the nut fixing. This kind of stability is very good. If it can solve the problem of water removal, it will be a popular trend in the future.
Concerned about surprises
Label: Faucet Installation method
Previous: Hardware knowledge: teach you how to use and maintain hardware locks Next: Hardware pendant maintenance bathroom hardware maintenance knowledge Daquan
Galvanized steel wire is made of high-quality carbon structural steel such as 45#, 65#, 70#, 80#, 90#, etc., and then heat-treated and galvanized. It is mainly used for galvanized steel wire mesh, construction engineering, spring and the manufacture of various galvanized Steel Wire Rope. The product has a uniform coating, easy to draw, small zinc loss, few broken wires, and good corrosion resistance.
Galvanized Steel Wire Rope,Galvanized Steel Cord,Galvanized Steel Saw,Galvanized Cutting Steel
Jiangyin Baoneng Precision New Material Co.,LTD , https://www.baonengwire.com