In home renovations, we must be alert to the top 10 places for decoration companies or decoration teams, because these ten areas are the most vulnerable to cutting corners and are not seen by the owners.
Origin International Solid Wood Furniture Gold Tianwei Tile
Wall paint
Phenomenon: Latex paint is the most common wall decoration material. It can be painted, rolled or sprayed in specific construction. If the workers are not serious or perfunctory during construction, small color differences often occur. Especially with deeper emulsion paints, this problem is more likely to occur.
Experts advise: Before the use of latex paint to add a certain amount of water, deployment of a good latex paint to run out. Paints of the same color are also best painted once. If the wall needs to be repaired after construction, the whole wall should be repainted again.
2 sewage pipeline
Phenomenon: During the renovation of the construction team, sometimes to save time and effort, dump pieces containing a lot of cement, sand, and concrete into the sewers. The direct consequence of this is a serious blockage of the sewer, causing the kitchen and toilet to run out of water due to poor water. Although some projects have no problems in the final acceptance, they always have problems with poor water.
Experts advise: Strict supervision of the construction team, can not use the sewer as rubbish use. After the construction of the waterway is completed, fill all the basins, basins, and bathtubs with water. Then, check if the water is open and whether there is leakage in the pipes.
3. Wire connector
Phenomenon: When the electrician installs sockets, switches, and lamps, it does not wire according to the construction requirements. In particular, when consumers use some electric appliances such as water heaters and air conditioners that consume large amounts of electricity, the switches and outlets are heated and even burned, causing great losses to consumers.
Experts advise: In the construction of supervision of electricians in strict accordance with the operating procedures for construction, after all the switches, sockets installed, be sure to carry out the actual use to see if these parts have a fever phenomenon.
4. Wall tiles
Phenomenon: Paving tiles is a technical process. If workers cut corners, they are most prone to problems such as empty tiles, missing seams, and cement and adhesives used for laying tiles. If the ratio is unreasonable, there will be problems such as shedding.
Experts reminded: According to the Beijing Construction Committee issued the "family home decoration project quality acceptance standards," require tile paving should be flat and solid, clear patterns, no dirt and paste marks, the surface color is basically the same, uniform seams, plate crack-free , Drop angles and missing edges, local emptying must not exceed 5% of the total number.
5. Wall tick
Phenomenon: The buried pipeline must be slotted on the wall and the ground in order to bury the pipeline. A small number of workers are barbaric in the trenching operation, which not only destroys the building load-bearing structure, but also may cause damage to Other nearby pipelines.
Experts advise: Before construction, we must reconfirm the direction and location of the pipeline with the construction team leader. For different wall structures, the requirements for slotting are not the same: the walls of the load-bearing wall in the house are not allowed to be slotted, and the wall with the insulating layer is easy to cause cracking on the surface after being slotted, and on the ground Slotting, but also be careful not to damage the floor, causing trouble to the residents downstairs.
Construction Acceptance Notice Three Trees Lacquer Emulsion Paint Coating Cement Switch Decoration Find Decoration Company Okay Bathroom Tile Color Bathroom Tiles Bathroom Tiles Bathroom Door Tiles Tile Kitchen Tile Decoration Home LD Tiles
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysoncool.com