Grade/Comparative Standard ISO/Physical Mechanical Properties (min): Bending Strength N/mm2; Hardness HRA/Use.
1. YG3x/ K01/ 1420; 92.5/ is suitable for high speed finishing of cast iron, non-ferrous metals and alloys, hardened steel alloy steels.
2, YG6 / K20 / 1900; 90.5 / suitable for cast iron, non-ferrous metals and alloys, non-metallic materials in the middle to the cutting speed of semi-finishing and finishing.
3, YG6x / K15 / 1800; 92.0 / for chilled cast iron, ductile iron, gray cast iron, heat-resistant alloy steel cutting section of high-speed finishing, semi-finishing.
4. YG6A/K10/1800; 92.0 / High-speed finish machining for medium and small cutting sections of chilled cast iron, nodular cast iron, gray cast iron and heat-resistant alloy.
5, YG8 / K30 / 2200; 90.0 / Suitable for cast iron, non-ferrous metals and alloys, non-metallic materials, low-speed rough processing.
6, YG8N / K30 / 2100; 90.5 / for cast iron, white cast iron, ductile iron and chromium nickel stainless steel alloy materials such as high-speed cutting.
7, YG15/K40/ 2500; 87.0 / suitable for oil wells, coal mining bit, geological exploration drill.
8, YG4C/1600; 89.5/ Suitable for oil wells, coal mining bits, geological exploration drills.
9, YG8C / 1800; 88.5 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
10, YG11C / 2200; 87.0 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
11. YW1/M10/1400; 92.0 / Medium-speed semi-finishing for steel, heat-resistant steel, high manganese steel and cast iron.
12, YW2/M20/1600; 91.0 / Suitable for heat-resistant steel, high manganese steel, stainless steel and other hard-to-process steel, low-speed roughing and semi-finishing.
13. GE1/M30/2000; 91.0 / Low-speed rough machining and watch gear wear-resistant parts for non-metallic materials.
14, GE2 / 2500; 90.0 / carbide top hammer special grades.
15, GE3/M40/ 2600; 90.0 / suitable for the manufacture of small diameter micro drills, end mills, rotary knives and so on.
16, GE4 / 2600; 88.0 / suitable for printing needles, cylinders and special-purpose tubes, rods, belts and so on.
17, GE5 / 2800; 85.0 / suitable for roll, cold punch and other impact materials.
18, YT30 P01 92.5 For carbon steel, alloy steel finishing, small cross-section of fine cars, fine boring, fine expansion and so on.
1. YG3x/ K01/ 1420; 92.5/ is suitable for high speed finishing of cast iron, non-ferrous metals and alloys, hardened steel alloy steels.
2, YG6 / K20 / 1900; 90.5 / suitable for cast iron, non-ferrous metals and alloys, non-metallic materials in the middle to the cutting speed of semi-finishing and finishing.
3, YG6x / K15 / 1800; 92.0 / for chilled cast iron, ductile iron, gray cast iron, heat-resistant alloy steel cutting section of high-speed finishing, semi-finishing.
4. YG6A/K10/1800; 92.0 / High-speed finish machining for medium and small cutting sections of chilled cast iron, nodular cast iron, gray cast iron and heat-resistant alloy.
5, YG8 / K30 / 2200; 90.0 / Suitable for cast iron, non-ferrous metals and alloys, non-metallic materials, low-speed rough processing.
6, YG8N / K30 / 2100; 90.5 / for cast iron, white cast iron, ductile iron and chromium nickel stainless steel alloy materials such as high-speed cutting.
7, YG15/K40/ 2500; 87.0 / suitable for oil wells, coal mining bit, geological exploration drill.
8, YG4C/1600; 89.5/ Suitable for oil wells, coal mining bits, geological exploration drills.
9, YG8C / 1800; 88.5 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
10, YG11C / 2200; 87.0 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
11. YW1/M10/1400; 92.0 / Medium-speed semi-finishing for steel, heat-resistant steel, high manganese steel and cast iron.
12, YW2/M20/1600; 91.0 / Suitable for heat-resistant steel, high manganese steel, stainless steel and other hard-to-process steel, low-speed roughing and semi-finishing.
13. GE1/M30/2000; 91.0 / Low-speed rough machining and watch gear wear-resistant parts for non-metallic materials.
14, GE2 / 2500; 90.0 / carbide top hammer special grades.
15, GE3/M40/ 2600; 90.0 / suitable for the manufacture of small diameter micro drills, end mills, rotary knives and so on.
16, GE4 / 2600; 88.0 / suitable for printing needles, cylinders and special-purpose tubes, rods, belts and so on.
17, GE5 / 2800; 85.0 / suitable for roll, cold punch and other impact materials.
18, YT30 P01 92.5 For carbon steel, alloy steel finishing, small cross-section of fine cars, fine boring, fine expansion and so on.